BOSTON GEAR Bearing
BOST-BRONZ is Boston Gear’s all-purpose, oil-impregnated porous bronze bearing material. It is manufactured of highest purity metal powders by the powder metallurgy process. This process provides uniformly distributed pores between the metal particles which absorb oil by capillary action. BOSTBRONZ has a self-contained oil supply (approximately 20% by volume) which provides a uniform, protective film over the entire bearing surface. Composition and physical properties are as follows: – BOST-BRONZ can be used for production and replacement requirements in practically every known industry. It has proven to be efficient under heavy loads at moderate speeds and also under light loads at high speeds. It is ideally suited for applications where normal lubrication is difficult or impossible to provide.
The close tolerances of BOST-BRONZ bearings are made possible through expertly controlled manufacturing methods. In addition, the lubricating features of BOST-BRONZ permit reduced shaft clearances — a precision product with precision performance. Performance Because of its porous construction, BOST-BRONZ bearings have an oil reservoir when idle — an oil film to start on — an oil film to run on, assuring low starting torque and smooth, quiet positive performance. Adaptability BOST-BRONZ bearings are designed for immediate installation and may be used in most applications without additional machining. Oil holes or grooves are not required and turning or boring bearing diameters is normally unnecessary
- BOSTON GEAR M2126-24 Sleeve Bearings
- Metric
- FAG BEARING
- BOSTON GEAR M2032-32 Sleeve Bearings
- Mounted Units &
- 0.49
- BOSTON GEAR M2028-40 Sleeve Bearings
- Not Applicable
- 3.937 Inch | 100 Mil
- BOSTON GEAR MS56 Plain Bearings
- 5899256
- 1 Piece Solid
- BOSTON GEAR MS22 Plain Bearings
- 0.0
- KOYO
- BOSTON GEAR MS14 Plain Bearings
- QM INDUSTRIES
- M06288
- BOSTON GEAR MCB6080 Plain Bearings
- 320.000 mm
- 3.09
- BOSTON GEAR MCB6896 Plain Bearings
- N/A
- SCHAEFFLER GROUP
- BOSTON GEAR MCB64104 Plain Bearings
- Not Applicable Inch
- Open
- BOSTON GEAR MCB5280 Plain Bearings
- Take Up
- Cast Iron
- BOSTON GEAR MCB4888 Plain Bearings
- 2.0
- SAE841
- BOSTON GEAR MCB4864 Plain Bearings
- Bearing
- 13 Inch | 330.2 Mill